垦利涟稼电子商务有限公司

Position: Home > News > Q&A

Automatic dispensing machine no longer causes and solutions

Motors are widely used in industrial industries, and automatic dispensing machines are no exception. The use of motor in the dispensing equipment can make the dispensing machine automatically return to the set state after starting up. If the motor does not recover after the dispensing machine is turned on, then there is a problem with the automatic dispensing machine, then how to deal with this problem? Let's take a look.

99

1, dispensing machine stop button problem

Solution: Check whether the rubber machine emergency stop button is pressed.


2, dispensing machine wiring problems

Solution: Open the chassis, check whether the hardware connection of the automatic dispensing machine is correct, confirm whether the driver is powered on, confirm the driver, emergency stop switch, jumper Settings are correct; Verify that all cables, such as serial cables, are correctly connected.


3, dispenser firmware or configuration file is incorrect

Solution: The dispenser's firmware upgrade may not be successful, or the profile update may not be successful. Re-upgrade firmware and configure mechanical parameters; Boot automatic reset is not set.

Quote

Contact

Tel

189 2251 4695
阳春市| 光泽县| 新郑市| 襄垣县| 如东县| 汪清县| 固阳县| 基隆市| 舞阳县| 旌德县| 读书| 增城市| 麦盖提县| 遂平县| 蓝田县| 连云港市| 剑川县| 调兵山市| 沂源县| 旺苍县| 阿克苏市| 常熟市| 安福县| 长沙县| 扶沟县| 县级市| 咸阳市| 资中县| 井陉县| 苏尼特左旗| 东源县| 迭部县| 兴宁市| 商水县| 庆云县| 大城县| 嵩明县| 晋中市| 杭州市| 南华县| 吉林省|